Journal of Qilu University of Technology is a comprehensive academic journal (bimonthly) that is publicly distributed domestically and internationally. It mainly publishes academic papers and research reports in disciplines such as mathematics, physics, chemistry, biology, materials science, mechanical engineering, power and electrical engineering, electronic communication and automatic control technology, computer science and technology, chemical engineering, food science and technology, environmental science and technology, etc Scientific and technological achievements and reviews.
In order to improve the efficiency of manuscript review, editing, publishing, and the quality of the paper, the author should pay attention to the following matters:
1 Submission Path
This publication only accepts online submissions. For first-time authors, please register according to the website submission system requirements. Please submit the manuscript (in Word format) along the following path: (1) Go to https:/journal. qlu. edu.cn; Alternatively, (2) enter the official website of Qilu University of Technology (Shandong Academy of Sciences) (www.qlu. edu. cn) and click on the "Scientific Research", "Academic Journals", and "Journal of Qilu University of Technology" options. Select "Author Online Submission/Review" in the "Author Center" on the left, and then follow the prompts to complete the submission. Please provide the contact phone number of the main author (including at least the corresponding author).
2 Overall requirements
2.1 The manuscript should have high academic or practical value. Require clear arguments, reliable evidence, clear hierarchy, concise writing, accurate data, and standardized charts and citations.
2.2 Please use Word 2007 and above to record and arrange the manuscript; Chinese uses Song typeface, English uses Times New Roman, and the font color is black.
3 Content order
3.1 Chinese title (generally no more than 20 words); Author's name; The author's unit, city, and postal code; Chinese abstract (usually 300-500 words); Chinese keywords (usually 3-6).
3.2 Classification number of the Chinese Library.
3.3 English title; Author's name (Chinese Pinyin); The English name, city (Pinyin), and postal code of the author's organization; English abstract; English keywords (consistent with Chinese).
3.4 Text; List of references.
3.5 Please footnote the following content on the first page of the article:
(1) Fund project: Fund name (number)
(2) Author profile: Name (year of birth -), degree, professional title; The research direction is XXX XXX
(3) Corresponding author: Name (year of birth -), degree, professional title; The research direction is XXX XXX; Email.
4 Publication specifications
4.1 Title and Author's Name
(1) The meanings of Chinese and English titles should be consistent; The first letter of the substantive word in the English title is uppercase, and the rest are lowercase.
(2) The corresponding author is marked with an * in the upper right corner.
(3) The English format of the author's name is in Chinese Pinyin (surname pinyin is all capitalized, and the first letter of the first name is capitalized); The English name of the author's unit should be the full name without abbreviations.
4.2 Classification number
The article generally has an introduction and a main text section (Song typeface 5); The introduction does not require a hierarchical numbering system, and the main text is numbered using Arabic numerals. Generally, two levels are used (the first level is in Song typeface 4, and the second level is in bold typeface 5).
4.3 Letter symbols
(1) Letters must be distinguished: uppercase and lowercase, bold and italic, English and Greek, superscript and subscript.
(2) Physical quantities and units are recommended to be expressed in accordance with the provisions of the national standard (GB 3100-3102-1993). Physical quantities are in italics, and unit symbols are in bold; When combined units appear, please add a dot multiplication symbol between units, such as kg · m2/s.
(3) Abbreviations, abbreviations, or codes of professional terms must be indicated or explained when they first appear.
4.4 Formula
(1) The formula in the text is recommended to occupy a separate line and be placed on the left, with the serial number on the right. When writing formulas containing fractions in the text, please use diagonal fractions, such as v=s/t; Formulas with a root sign are recommended to be expressed in the form of a power, such as F (a)=(1-a) -1/2; More complex indices based on e are recommended to be expressed in exp form, such as exp (- EA/RT).
(2) Please do not use the formula editor to enter simple letters and symbols. Greek alphabet (e.g α、β） Please insert the corresponding letter directly and do not convert English letters (a, b) into Symbol symbols to avoid font conversion that may cause them to not display properly.
4.5 Chart
(1) The charts are numbered in Arabic numerals in the order in which they appear in the text; All charts should be mentioned in the main text and consistent with the serial numbers stated in the main text. The same batch of experimental data in the main text should not be repeated in the charts; You cannot set charts that are unrelated to the topic of the article.
(2) The chart should be self explanatory and equipped with chart and table questions (all in small 5 bold font); Picture and table questions should be as brief as possible, with explanatory text and explanations of the symbols used in the charts placed in the caption and table notes (both in Song typeface 6). Place the captions below the figure and above the title, and place the table captions below the bottom line (left aligned).
(3) The text in the chart (such as coordinate axis names) should be in Chinese instead of English as much as possible. The coordinates and header columns of the graph should use symbols for physical quantities, with corresponding units placed after the physical quantity (separated by a slash), such as T/K, t/s; Only numerical values are listed in the table.
(4) If there are more than two curves in the figure that need to be distinguished, it is recommended to use letter numbering; Please be careful to avoid unclear content differences caused by monochrome printing. The Chinese characters in the picture are in bold font, while numbers, letters, and other characters are all in Arial font, with a font size of 6. The coordinate scale lines in the figure should face inward.
(5) The images can be in formats such as TIF, JPG, PCX, BMP, etc. It is recommended to prioritize using TIF format. It is recommended to use Origin (version 8.0 and above) for plotting the curve and insert the Origin original image into a Word document without the need to convert it to JPG or TIF. The minimum resolution requirement for the image is: 600 dpi for black and white curve images, and 300 dpi for grayscale images. The photos should have clear layers and sufficient contrast; Microscopic images should indicate the size ratio. Please try to provide original drawing files (such as Chemraw, PPT, Photoshop, etc.) that are convenient for later editing and processing.
(6) When using Word software to process mixed text articles, please insert the images in a fixed position in the article in an embedded manner to avoid changes in the image position.
(7) The table adopts a three line table. The text in the table is in small 5 or 6 Song typeface. Repeated text in the table cannot be represented by "ditto" or "same left", and must be written in full.
4.6 References
(1) Text annotation: Number from "1" in the order in which it appears in the text (including charts) (note that the numbering is consistent with the list at the end of the text), and label it in square brackets at appropriate positions in the sentence. Generally, the sequence number is placed before the punctuation mark in the sentence (e.g.... Given synthesis method [5,7-9]); When referring to the cited author, place the serial number after the author's name. If there are two authors, list them all (such as Zhang Wenlan and Li Siqi [3-4]), and if there are more than two authors, use the form of "first author+etc.". When the citation numbers are not continuous, they are separated by commas in the middle, and when the citation numbers are continuous, they are connected with "-" to connect the beginning and end numbers.
(2) End of text list: Place the literature number in square brackets. If the number of authors is 1-3, all authors must be listed; If there are more than 3 people, it is recommended to use the form of "top three author names+etc.". All (including Chinese literature) are punctuated in English, with a natural space added after each punctuation.
(3) Description format: In accordance with the national standard (GB/T 7714-2015).
① Extracted literature in continuous publications (such as journals): main responsible person. Title [J]. Publication name, year of publication, volume (issue): starting and ending page numbers
② Monograph: Main Responsible Person. Book Title [M]. Place of Publication: Publisher, Year of Publication: Start and End Page Numbers
③ Thesis: Author. Title [D]. Storage location: Awarding unit, awarding time
④ Patent: Patent applicant or owner. Patent title: Patent number [Document type identification/Document carrier identification]. Announcement date or publication date [citation date]. Access and access path. Digital object unique identifier
⑤ Electronic literature: main responsible person. Title: other title information [literature type identification/literature carrier identification]. Place of publication: publisher, year of publication: citation page number [citation date]. Access and access path. Digital object unique identifier
(4) English format
① Author's Name: Full Pinyin of Surname (uppercase)+(one natural blank) First Letter of First Name (uppercase, leave one natural blank between letters); Author names are separated by commas.
② Title: Only the first letter of the sentence is capitalized, and the rest are lowercase.
③ Publication name: It is recommended to use the full name, with all substantive words starting with uppercase letters (other lowercase letters).
Example: LARSON D R, ZIPFEL W R, WILLIAMS R M, et al. Water soluble quantum dots for multiphoton fluorescence imaging in vivo [J] Science, 2003, 300 (5624): 1434-1436
Mailing Address: 3501 Daxue Road, Changqing District, Jinan City (250353)
Unit Name: Editorial Department of Journal of Qilu University of Technology
Contact number: (0531) 89631135/89631123
