At present,multi-modal neuroimaging data is widely used in Alzheimer’s disease (AD) classification research.However,these research methods have certain limitations.Firstly,the original feature dimension is high,and it contains a large amount of redundant information,requiring a large amount of computational resources for processing and analysing.Secondly,it is difficult to obtain complete multi-modal data from the same patient,resulting in a small sample size,which is not conducive to training reliable classification models.To address these issues,this paper proposes an AD classification method based on maximum relevance-minimum redundancy (mRMR) and canonical correlation analysis (CCA).Specifically,the mRMR algorithm is first used to select discriminative features that are most relevant to the classification label from each modality data.Then,the CCA algorithm is used to explore the inherent connections among multi-modal data,and finally,classification is performed.This paper conducted experiments by using data from the Alzheimer’s Disease Neuroimaging Initiative database,and the results demonstrated the effectiveness of the proposed method in AD classification.

Aiming at the problems of long training time and slow convergence speed of deep reinforcement learning methods in robot path planning,an improved Twin Delayed Deep Deterministic Policy Gradient (TD3) algorithm is proposed.The algorithm introduces the gravitational field and repulsive field in the artificial potential field to optimize the reward function of TD3,which guides the robot to avoid obstacles to the target point reasonably,so as to improve the convergence speed and accuracy of the algorithm;at the same time,it applies motion constraints rules to constrain the direction of the robot’s motion,which makes the trajectory smoother and more fluent.The results of simulation experiments show that in a multi-obstacle environment,the proposed algorithm can effectively make the robot avoid obstacles and plan a reasonable path,and the improved algorithm has a higher planning success rate and a shorter planning path compared with other methods.

CoCrNi medium entropy alloy was produced by laser melting deposition process,and the influence of laser power on microstructure and properties was studied.The findings show that when the power is 800~1 600 W,the metallurgical bonding between the deposition layer and the substrate is good,and the fusion line is clearly visible.The structure along the building direction of the deposition layer is planar crystal,columnar crystal and equiaxed crystal.With the increase of power,the breadth of the deposition layer increases,the microstructure coarsens,and the microhardness gradually decreases.The laser power is P=800 W,the performance is optimal,and the microhardness of the fusion zone,middle and top of the deposited layer is 393,435 and 496 HV.

With the rapid development of modern intelligence and automation,mobile AGVs are beginning to play an important role.This paper is devoted to the study of trajectory tracking control method of McNamee wheel AGV (Automated Guided Vehicle),which adopts adaptive sliding mode control in order to improve the performance of its application in the field of automated logistics and manufacturing.Firstly,the McNamee wheel AGV is mathematically modelled to establish its kinematic and dynamic models while considering external disturbances.Secondly,an adaptive sliding mode trajectory tracking controller is designed on the basis of the dynamics model,which realizes the control of the system state by introducing the sliding mode surface,and then the stability of the control method is analyzed by using Lyapunov theory.Finally,the controller is verified through matlab simulation experiments to improve the trajectory accuracy as well as the effectiveness of the AGV.

How to shorten the patient's clinic time and improve the service efficiency and quality has become an important problem to be solved in the emergency department.Based on Flexsim software modeling,this study simulates and optimizes the emergency department treatment process.First,the input data required by the simulation model is processed by the Kolmogorov-Smirnov goodness-of-fit test together with other statistics methods.Second,through Flexsim software modeling and simulation,the resource bottleneck of emergency department treatment process is found out.Third,an optimization and improvement scheme is proposed to eliminate the resource bottleneck.And based on the Flexsim simulation model,the rationality of the optimized scheme is verified.Through optimization and improvement,the resource bottleneck of the emergency department system was eliminated,the patient crowding was effectively reduced,the patient's clinic time was shortened,and the treatment efficiency and patient satisfaction were improved.

Information entropy is commonly used to measure the uncertainty of random variables and plays a significant role in various fields such as physics,statistics,and information theory,aiding in our understanding and explanation of diverse phenomena.Unlike the entropy in thermodynamics,information entropy exhibits a certain degree of orderliness,which stands in stark contrast to the disorder and complexity represented by entropy.Using a binary statistical model as an example,this article explores the connection between information entropy and random events,quantitatively describes the evolution process of information entropy,and reveals the fundamental principles underlying the orderliness of information entropy.

In order to solve the problem of low feedback accuracy of channel state information feedback method in frequency-division duplex massive multi-input multi-output system,a CSI feedback network named CDTransformer based on Transformer and convolutional decomposition (CD)is proposed.CDTransformer incorporates convolutional decomposition into an improved Transformer network architecture to improve network performance without adding computational complexity,and enables lightweight deployment by binarizing the full connectivity layer of the network.A MixedTransformer network model is proposed for the limited power of the client.The encoder adopts a single layer convolutional neural network with low computational cost and simple structure,while the decoder adopts the same structure as the CDTransformer model.The CDTransformer model incorporates the Transformer structure and convolutional decomposition to improve CSI feedback accuracy and enable lightweight deployment.In addition,the MixedTransformer model was introduced,combining the advantages of CDTransformer and convolutional neural networks to provide better performance in power limited situations.The results show that compared with the CsiTransformer network model,the normalized mean square error and cosine similarity of CDTransformer network model are improved by 37.7% and 0.2%,respectively.

Based on the First Principles,using the CASTEP module and virtual crystal approximation model,utilizing GGA+PBE functional correlation function,the influence of composition on mechanical properties parameters in AlSi7MgX (X=0.1~0.5) and AlSiXMg0.3 (X=6~9) alloys was studied.It is shown that the lattice constant decreases with the increase of the content of the alloy elements,and there exists a difference of approximately 0.265% between the maximum and minimum values;the elastic constants C11,C12,and C44 meet the structural stability conditions.The volume elastic modulus B,shear modulus G,Young’s modulus E,and Poisson's ratio u vary with Si and Mg content in A356 alloy.The change of Mg content has a more sensitive effect on the shear modulus G and Young's modulus E than the change of Si content.The comparison between the calculation results and existing experimental data shows that the calculation results are close to the experimental data,and it is feasible by using the First Principles to calculate the material parameters.

A robust soft sensor algorithm based on gate recurrent unit (GRU)is proposed to address the issues of multi-variability,nonlinearity,time delay,and measurement outliers in modern process industrial process variables.Firstly,an initial model of GRU is trained by historical data.Secondly,an improved least absolute Lp penalized solution (ILAPPS)algorithm is proposed,which incorporates median absolute deviation into the capped mean absolute error loss,making it more resistant to outliers;and embeds an adaptive operator based on permutation importance ranking design of random forest into Lp-regularization term to improve the accuracy of input variable selection.In addition,ILAPPS is embedded in the GRU input and recurrent layers to achieve sparse optimization of the network.Finally,the proposed algorithm is applied to artificial datasets and actual industrial copper ore flotation processes,and its performance is compared with other advanced algorithms.The experimental results show that the proposed algorithm has higher prediction accuracy and robustness.

“Polyphenols” is a class of bioactive natural substances that widely exist in plants.Sugarcane contains a large number of polyphenols with high antioxidant activity,which play an important role in controlling blood glucose levels and regulating immunity.By optimizing the ratio of water and ethanol and realizing sugarcane polyphenols without organic residues with ultrasound-assisted extraction,the sugarcane polyphenols extraction process was optimized through one-factor experimental method and response surface design.The test results show that the best extraction process of sugarcane polyphenols is ethanol concentration 58%,liquid ratio 11∶1（mL·g^-1）,water bath temperature 49 ℃,ultrasonic power 103 W,ultrasonic time 35 min,the yield of sugarcane polyphenols 18.87 mg·g-1,and the predicted value is 19.10 mg·g^-1.The prediction accuracy of this model is 98.8%.

During the plastic stress wave velocity stage of the workpiece material,brittle cutting of the workpiece can avoid problems such as difficult chip breaking,strain hardening,and tool sticking caused by the high soft viscosity of the material.In this paper,carbide tools,ceramic tools and cubic boron nitride (PCBN)tools are used to cut pure iron at high speed (linear speed up to 8 000 m/min),and the wear,cutting force and machined surface quality of the tools after cutting are observed.The results show that among the three kinds of tools,the carbide tools wear is the most serious,followed by the PCBN tools wear,ceramic tool wear is the least.Severe abrasive wear occurs on the flank face of carbide tool,and the rake face of PCBN tool shows crescent depression wear,which is full of high temperature melts and brittle fracture fragments.Ceramic tools have no obvious wear characteristics,but there is a lot of workpiece material adhesion on the rake face and flank faces.Compared with carbide and PCBN tools,ceramic tool machining workpiece machining surface has less defects,minimal lateral flow,minimum roughness and hardening layer,the ceramic tool is an ideal tool material for high-speed cutting of pure iron.

Fungi can form mycelial pellets with hollow inside and dense surface under submerged cultivation.These mycelial pellets have advantages of good flocculation performance,uneasily settling at the reaction tank bottom,broad growth conditions,and easy cultivation.Researchers have widely studied on the formation mechanism and cultivation conditions of mycelial pellets.Recently,the focus of researchers has gradually shifted to their application.At present,mycelial pellets have been applied in the fields of wastewater treatment and recovery of resource and energy.This review mainly introduces the self-assembly mechanism and the influencing factors of nutrient and culture conditions on the formation fungal mycelial pellets under submerged cultivation.Also,the study of fungal mycelial pellets carrying nanoparticles,microorganisms,biochar to treat wastewater and the potential and challenges for these types of complexes were summarized.Furthermore,the cases of fungal mycelial pellets treating various kinds of sewage and the running characteristics and application of the matching reactors were introduced.The application of fungal mycelial pellets should focus on the diversified and collaborative development,coupling their own advantages with heterologous substances to play a synergistic role and to promote the improvement in wastewater treatment and environmental remediation.This review can provide guidance and reference for the application of fungal mycelial pellets in wastewater treatment.

Blue is one of the three primary colors and is now widely used in many fields such as food,medicine and cosmetics.Most of the blue pigments currently used in food processing are synthetic blue pigments,and natural blue pigments are extremely rare in commercial applications.The study first found that Quambalaria cyanescens QY229 can metabolize to produce extracellular watersoluble blue pigment under liquid shake flask culture conditions,and the response surface optimization of its fermentation conditions was carried out.The results showed that when the peptone content was 34.61 g/L,the temperature was 31.67 ℃,and the bottling volume was 72.33 mL/250 mL,the color value of blue fermentation liquid could reach 348.2 U/mL,which was 2.1 times of that before optimization..Therefore,the production of blue pigment by liquid fermentation of Quambalaria cyanescens,QY229 as another new source of rare natural blue pigment,has a broad application prospect.

Aiming at the problem of online measurement of flotation concentrate grade that needs to be solved urgently in the process of beneficiation production,a non-negative garrote (NNG) algorithm is embedded in an online sequential extreme learning machine (OS-ELM) and a new method is proposed based on online soft sensing algorithm for concentrate grade selected by OS-ELM and its input variables.First,the trained OS-ELM network model is obtained through parameter optimization and its excellent online learning ability is used to recursively update the network output weights by adding new samples or sample blocks in the incremental learning process;the input weights of the OS-ELM network model are sparsely optimized,redundant variables are eliminated and the prediction accuracy of the model is improved;finally,the online model is applied to the soft sensing modeling of copper concentrate grade in the flotation process of a copper mine in a mining enterprise and is combined with other advanced algorithms and comparison of the measurement results of the on-site current-carrying X-ray fluorescence grade analyzer.The experimental results show that the proposed algorithm can effectively eliminate redundant variables,improve the accuracy of concentrate grade measurement and realize real-time accurate soft measurement of flotation concentrate grade.

Based on the environmental data before and after the establishment of Saihanba Forest Farm,the environmental evaluation index was given and the comprehensive evaluation model of TOPSIS environmental status based on entropy weight method was established.The outstanding contribution of the construction of the ecological protection zone of Saihanba Forest Farm to the improvement of the local and surrounding environment was studied,and the quantitative evaluation model was used to analyze its role in Beijings resistance to dust storms.Then,in order to explain more accurately the importance of the construction of Saihanba Forest Farm,a TOPSIS comprehensive evaluation model of environmental conditions based on analytic hierarchy process was established.The simulation results show that the conclusions of the two models are consistent.In order to study the ecological situation in China,the environmental data of thirtyone provinces were collected,and the environmental index evaluation system was established by principal component analysis.The environmental conditions of each province were scored,and the threshold was set through the environmental conditions of typical areas.The provinces with scores below the threshold need to establish ecological protection areas.Finally,in order to put forward a more reasonable construction plan for provinces that need to establish ecological protection zones,the economic level and land area of the province should be considered,and the construction area of each ecological protection zone and its impact on national carbon neutrality are given by quantitative comparison.

With the rapid development of automation and artificial intelligence,mobile robots have been widely penetrated into all walks of life,and path planning technology is the key to ensuring their autonomy and efficiency.This paper deeply analyzes several mainstream path planning algorithms,including graph search,random sampling,intelligent bionics,and deep reinforcement learning,and reveals the advantages and challenges of each algorithm in practical applications.This paper further classifies the path planning research according to the application scenarios and specifically analyzes the path planning methods and development trends of land robots,unmanned aerial vehicles,and underwater robots in their respective fields.In addition,this paper also looks forward to the possible future development directions of path planning techniques.Through this overview,this paper aims to provide valuable information and research ideas for researchers in this field.

A novel polymerized aluminum ferrosilicate flocculant (PSAFC) was prepared by using the acid leaching and alkali dissolved method based on the utilization of the natural composition of Si,Al,Fe,and Ca in coal gasification fine slag.Based upon the optimized preparation conditions,PSAFC was characterized by using X-ray fluorescence spectroscopy (XRF),X-ray diffraction (XRD),and Fourier-transform infrared spectroscopy (FT-IR).It was found that PSAFC was an amorphous,non-crystalline polymer inorganic flocculant formed by the aggregation of Si,Al,Fe,Ca elements.Subsequently,the flocculation performance of PSAFC was investigated by using kaolin suspension as the target.The results revealed that PSAFC exhibited optimal performance for kaolin suspensions with the removal efficiency more than 95% under the optimal conditions of the initial turbidity of 1 439 NTU,the mass concentration of PSAFC of 50 mg/L and pH 10.This investigation offers a novel approach and method for the comprehensive utilization of coal gasification fine slag and the preparation of polymer inorganic flocculants with high-performance.

With the continuous development of big data, the personalized recommendation of users is widely used. The existing recommendation algorithms ignore the community structure composed of various social relations between users. Relationships can be used well in recommendation systems. Based on the multi-subnet complex network model, this paper proposes a community partitioning probability matrix recommendation algorithm based on multiple social relationships by using the community structure characteristics composed of multiple social relationships. By comparing with the existing recommendation algorithms on the real data set Epinions, the accuracy evaluation indicators δ_MAE and δ_RMSE have been improved by 30% and 20% respectively. It can be proved that the community division probability matrix recommendation algorithm based on multiple social relations can effectively improve the recommended accuracy.

Magnetic coal gasification slag (MCGS) was prepared by acid leaching and chemical coprecipitation process,and further characterized by scanning electron microscopy (SEM),Fourier transform infrared spectroscopy (FTIR) and X-ray diffraction (XRD).The results showed that the coal gasification slag had a rough and porous structure,and the surface and pores were loaded with Fe₃O₄ particles with reverse spinel structure,which indicated that the magnetic coal gasification slag had been successfully prepared.Then,RhB was taken as the target pollutant to study its adsorption performance.The removal efficiency and adsorption capacity of RhB were 90.66% and 90.66 mg/g under the optimal conditions of pH 3.0,the adsorption time 200 min,the initial concentration of RhB 200 mg/L,and the dosage of magnetic coal gasification slag 2.0 g/L.Moreover,the adsorption isotherm and adsorption kinetics results demonstrated that the adsorption process of RhB by MCGS was in agreement with pseudo second-order kinetic and Langmuir isotherm,indicating that the process was a single molecular layer adsorption dominated by chemisorption.The research provides a new technique and method for the resource utilization of coal gasification slag.

Accurate power load forecasting is the basis to ensure the stable operation of the power grid,and is also an important basis for power planning.In order to improve the accuracy of power load forecasting,a new forecasting model is proposed in this paper.First,the Harris Hawk algorithm is optimized by using chaos strategy and sine and cosine perturbation strategy,and then the weight and threshold of the limit learning machine are optimized by using the improved Harris Hawk algorithm.Finally,the model is used for short-term power load forecasting.Compared with other prediction models,the prediction effect of this model is greatly improved,and it has better generalization ability and stability.

In recent years,triboelectric nanogenerator (TENG) has developed rapidly and is widely used in the fields of energy collection,human-computer interaction,wearable electronics medical electronics and so on.Traditional TENG is usually prepared from the nonbiodegradable and unrecyclable polymer materials and metal materials,which will definitely pollute the environment.Therefore,the exploration of green TENG has become a research hotspot.Cellulose materials promote the development of environment-friendly TENG with advantages of degradability,regeneration,easy modification and processing.In this paper,the structure,working principle and working mode of TENG are briefly introduced and the research progress and application examples of nanocelluloses film,cellulose paper and cellulose aerogel as triboelectric materials are emphatically summarized.Finally,the future development of cellulose based TENG is prospected.

Soil organic carbon (SOC),soil inorganic carbon (SIC) and soil carbon and nitrogen ratio (C/N) are important chemical properties of soil,and the study about the effects of different grazing strategies on soil chemical properties has a significant impact on maintaining the sustainable development of grassland ecosystems.To explore the effects of different grazing strategies on soil chemistry properties,this study investigated a sample of soil chemical property data under different grazing strategies in a designated area of Xilin Gol Grassland,in order to determine the impact of different soil chemical properties on the environment by using the factor analysis method in principal component analysis.The results show that the ratio of soil organic carbon,soil inorganic carbon and soil carbon nitrogen is greatly affected by the environment.In fact,the ARIMA model (integrated moving average autoregressive model)in the time series method is adopted in this paper to predict the contents of organic carbon,inorganic carbon and total nitrogen in grazing areas,and corresponding prediction models are given.The prediction model of the effects of different grazing strategies on soil organic carbon content is ARIMA (2,0,0),the prediction model of soil inorganic carbon content is ARIMA(2,1,1),and the prediction model of soil carbon-nitrogen ratio is ARIMA(3,0,0).

This paper establishes a half-vehicle 7 degree-of-freedom rigid-flexible coupling dynamic model and simplifies using the Euler-Bernoulli beam model.Given the limitations associated with the traditional PSO algorithm,which include susceptibility to being stuck in local optima and so on.Three methods,namely chaotic initialization,dynamic inertia weight,and adaptive learning factor,are introduced to optimize the algorithm.Accordingly,a refined variant of the PSO algorithm,namely the Adaptive Inertia Weight PSO,has been introduced.Ultimately,by using MATLAB simulation modeling,the outcomes of three scenarios are meticulously compared:the absence of optimization,optimization via the conventional PSO algorithm,and optimization through the enhanced PSO algorithm.These scenarios are evaluated based on four distinct performance aspects.The findings clearly indicate that the refined PSO algorithm surpasses the other two approaches in all metrics,thereby confirming the effectiveness of the proposed algorithm in greatly enhancing the fluidity of vehicle movement and driving stability.

In this paper,the fuel-optimal trajectory of orbit transfer with multiple specific-direction thrusts is studied.The indirect optimization method is applied to optimize fuel consumption.To overcome the difficulty in nonsmooth integration caused by the bang-bang control,the homotopy method is adopted to solve the fuel-optimal problem from a related energy-optimal problem.An initial guess generation method is designed based on a simplified dynamical model to overcome the difficulty in providing the initial guesses for co-states.Numerical simulation is presented,the results show that the initial guess obtained by the method provided in this paper is more probable and easier to converge.The validity and efficiency of this initial guess generation method are verified.

There is a natural demand for integration between the cultural industry and the tourism industry;however,digital technology has become a driving force for the high-quality development of the cultural tourism industry.Based on the industrial characteristics of cultural industry and tourism industry and the interaction mechanism between them,index system of cultural and tourism industry was constructed from four dimensions:industrial scale,industrial reception,industrial strength and industrial efficiency in this paper.The coupling coordination model was introduced to measure the development level and coupling coordination degree of the two major industries in Shandong Province from 2010 to 2020,and the time series changes were analyzed.The results of the study showed that in addition to the impact of the epidemic in 2020,the overall development level of cultural industry and tourism industry in Shandong Province has been improving year by year,however,the development of the cultural industry generally lagged behind the development of the tourism industry;the coupling coordination degree showed a steady upward trend,increased from 0.390 8 to 0.900 6,coordination level was upgraded from mild dysregulation to excellent coordination.Based on this,from the aspects of cultivating cultural tourism industry to enhance the new momentum of integrated development of cultural tourism,building digital cultural tourism platform to improve the value co-creation mechanism,expanding the transmission channels of technology and product innovation,and training new digital cultural tourism talents,a path was put forward to promote the digital economy to empower the high-quality development of cultural tourism integration.

Computing color constancy refers to the ability to eliminate the influence of scene light sources and thus reproduce the true color of an object.Currently,significant improvements in color constancy accuracy have been achieved by using deep neural networks,but most deep learning algorithms have long training time,high computational complexity,and require a large number of training samples.To address this problem,this paper proposes a simple and effective method that combines adaptive neuro-fuzzy inference system (ANFIS) and least squares support vector machine (LSSVM).The method is divided into two phases:training and prediction.In the training phase,image features are first extracted to train two initial light source estimation models,ANFIS and LSSVM,respectively.Then the kernel function transform is used to fuse the two models,and the multivariate linear regression model of light source estimation is obtained by using the reserved training samples for further training.In the prediction phase,after extracting the features of the test image,the final color values of scene light source of the test image is predicted directly from the training data.The experimental results show that,compared with the deep learning method,the proposed method is of lower computational complexity and even with small training samples,and it also has good light source estimation performance.

With the development of deep learning,it has significance to use the knowledge that is related to deep learning to realize the informatization and intellectualization for water surface object detection.Affected by the complex environment,the instance segmentation for water surface objects is still one of the difficulties today.An improved Mask R-CNN model is proposed based on the instance segmentation for water surface objects.In the construction phase of the dataset,the images are labeled using labelme.Image enhancement is achieved by adding Gaussian noise,random brightness,etc.In the improvement of Mask R-CNN model,ResNeXt50 is used as the backbone network,and adding attention mechanism in FPN Network.In the IOU=0.5 discrimination mode,compared with the original Mask R-CNN model,the average precision of detection and segmentation is improved to 89.3%,88.5% respectively.Therefore,the improved Mask R-CNN network model is more suitable than the original Mask R-CNN network model for instance segmentation of water objects.

Paper black liquor accounts for over 90% of the pollution in the entire paper industry,which would seriously pollute environment.A large amount of organic matter in papermaking black liquor can serve as a precursor for the synthesis of fulvic acid.Many studies have shown that fulvic acid has a good adsorption effect on heavy metals.According to the method recommended by the International Humic Acid Association,the alkaline fulvic-like acid (JFLA) and ammonium fulvic-like acid (AFLA) were successfully extracted from the black liquor of two different papermaking processes.Through equilibrium complexation experiments,the adsorption effects of two types of fulvic-like acids on lead were studied in heavy metal aqueous solutions with different Pb concentrations and pH.Research has shown that AFLA has better adsorption capacity under low Pb concentration and high pH conditions,and AFLA has stronger adsorption capacity than JFLA.The results of this study indicate the possibility of black liquor fulvic-like acid to repair the Pb polluted water.

Based on strict logical reasoning,“having infinitely many prime numbers in the form of 4k-1(k∈Z+)” and “having infinitely many prime numbers in the form of 6k-1(k∈Z+)”are proved.Based on the square residue and Euler criterion,“having infinitely many prime numbers in the form of 4k+1(k∈Z+)”is proved.Based on order and Euler Theorem,“having infinitely many prime numbers in the form of 6k+1(k∈Z+)” is also proved.

In this study,chitosan/aminated graphene quantum dot composite aerogel (CSx@AGQD-HPW12) modified by phosphotungstic acid was successfully prepared by chemical cross-linking and impregnation methods.The materials were characterized by XPS,SEM,TEM,BET and UV-vis DRS.The adsorption and photocatalytic performance of CSx@AGQD-HPW12 on ciprofloxacin solution was investigated under UV-vis conditions.Compared with the other three materials,CS0.50@AGQD-HPW12 showed optimal performance with a pre-sorption photocatalytic removal rate of 98.8% for ciprofloxacin.The total organic carbon removal efficiency was about 52.1%.The regulation law of chitosan on the performance of CSx@AGQD-HPW12 was revealed,and the addition of chitosan modulated the morphology,band gap,and photoelectric properties,which in turn improved the adsorption-photocatalytic performance of the composite aerogel.

The adaptive filter algorithm is the core of active control systems (ACS).To further improve the performance of the normalized variable step size filter-x least mean square (NVSS-FxLMS)algorithm,the signal interpolation concept is introduced in this research,and the algorithm combining the signal interpolation with normalized variable step size concept (INVSS-FxLMS algorithm)is proposed to improve the control performance and convergence rate of the NVSS-FxLMS algorithm,then the effect of the number of signal interpolation on the performance of the algorithm is explored.The results show that the signal interpolation can improve the control performance and convergence rate of the NVSS-FxLMS algorithm.Besides,the optimal range of the number of signal interpolation exists.When the number is about 10,the control performance and convergence rate of the algorithm is relatively better,and the total sound pressure level or acceleration level in the frequency domain is reduced by about 18%,while the computational time increases by 9.6%.The research provides a new idea for the improvement of the NVSS-FxLMS algorithm,and lays the foundation for the development of the ACS.

For the problem of poor accuracy in passive location with far field and small aperture array under strong interference,a location algorithm was proposed based on direction angle lateral cross.Firstly the principle of cross lateral positioning method was analyzed to construct the improved targeting geometrical and numerical models.Then target estimate prediction equation was established by the building model and the nonlinear prediction equation was processed by linearization.The prediction equation was developed at the reference point with Taylor series and the correction equation was obtained.The goal's progressive unbiased estimate was obtained by optimizing control of iterative process to achieve target pinpoint.The main error factors of the proposed algorithm were analyzed to study the impacts on the target location accuracy of different errors.Simulation results show that the proposed algorithm can locate the target effectively and has better positioning performance than traditional location algorithms in large direction angle error and background noise.

The transcription factor Ask10p of Saccharomyces cerevisiae,also known as Rgc2p,not only plays an important role in cell wall biosynthesis,but also participates in the regulation of oxidative stress as a component of the RNA polymerase II holoenzyme,and also participates in the regulation of osmotic balance as a positive regulator of the aquaglyceroporin Fps1p. In recent years,with the deepening of research,Ask10p has been confirmed to play an important regulatory role in oxidative stress,osmotic stress,acetate and toxic metal ion stress,and xylose metabolism. In this review,the biological functions and current research advances of Ask10p in Saccharomyces cerevisiae were presented,and the research directions were also prospected in order to provide reference for future research directions.

Aiming at the problems of incomplete deblurring and texture detail loss in non-uniform blind deblurring algorithms in dynamic scenes,an image deblurring method based on multi-input and multi-output codec network is proposed.Firstly,a feature extraction module is used to extract the global and local feature information from the different scale blurred images.As a result,the network can obtain richer and more comprehensive image feature information.Secondly,a feature fusion module is used to fuse multi-scale features,so that context feature information and detail information at different scales can flow in a single U-net network,which enhances the fluidity of feature information,and solves the problem of feature flow blocked due to multiple subnetworks stacking used in the traditional method.Finally,a mixed loss function consisting of L1 loss,multi-scale frequency reconstruction loss and edge loss is designed to improve the image restoration effect while preserving the texture structure and edge information better.To evaluate the deblurring performance of the network,experiments are conducted on the benchmark data sets:GoPro and HIDE.Results show that the mean values of peak signal-noise ratio and structural similarity of the restored images are 31.94 dB,29.45 dB and 0.961,0.936,respectively,which are higher than that of the compared deblurring algorithms.In terms of subjective visual effect,restored images of the proposed deblurring method is clearer in image texture structure and edges and closer to the real images.The network model proposed in this paper can obtain richer feature information,enhance the flow ability of internal features of the network,and achieve better deblurring effect.

The robust empirical likelihood inferences for varying coefficient partially linear models are studied.Using weighted composite quantile regression and empirical likelihood method,combined with orthogonal projection technology based on matrix QR decomposition,an empirical likelihood estimation method based on weighted composite fractional regression is proposed for parameter components of the model.Theoretical proof has been provided that the proposed empirical logarithmic likelihood ratio function asymptotically follows a chi square distribution,thereby constructing confidence intervals for parameter components.The orthogonal projection technique based on matrix QR decomposition is introduced in this estimation method,which ensures that the estimation of parameter components is not affected by the estimation accuracy of nonparametric components,so it has better robustness and effectiveness.

With the increasingly severe energy problem,the design idea of converting lignocellulose,which is abundant renewable resources in nature,into second-generation fuel ethanol provides a way to solve the current energy crisis,food crisis and environmental crisis.However,microorganisms also face a number of technical problems in the process of fermentation to produce second-generation ethanol.Among them,a variety of small molecule chemicals produced by lignocellulosic degradation will not only inhibit the growth and reproduction of microorganisms,but also reduce the fermentation efficiency of microorganisms.Acetic acid is one of the main inhibitors commonly found in many degradation products of lignocellulosic materials.In order to improve the efficiency of microbial lignocellulosic ethanol fermentation,this study selected Saccharomyces cerevisiae,an ethanol fermentation strain with the greatest potential in industrial production,as the model organism,and simulated the acetylation of histone H3K9 by mutating the ninth lysine (K) of histone H3 into glutamine (Q) to investigate the tolerance of histone H3K9Q point mutants to acetic acid,a fermentation inhibitor.The results showed that H3K9Q point mutation could significantly improve the growth performance of Saccharomyces cerevisiae under acetic acid.The growth curve experiment further showed that H3K9Q point mutation could make the strain rapidly enter the exponential phase under 3.5 g /L acetic acid stress,which was shortened from 36 h to 24 h.Moreover,after 48 h of growth in medium with acetic acid,the OD600 of H3K9Q point mutant was about 1.9 times that of the control strain.These results indicated that H3K9Q point mutation significantly improved the acetic acid resistance of Saccharomyces cerevisiae,and this study provided a useful reference for strain optimization in cellulosic ethanol production.

To monitor the hydraulic system status of a loader and conduct performance diagnostic analysis and optimization design,a multi-channel data acquisition system was implemented using MATLAB/Simulink and LabVIEW.The data acquisition program,constructed in MATLAB/Simulink,was exported to the PowerECU-57AL controller to achieve synchronized collection of multiple signals.The collected data was transmitted to the testing system via a CAN analyzer.The monitoring interface of the testing system was designed using LabVIEW,utilizing the CAN communication protocol to receive and analyze the data collected by the controller.Real-world testing results demonstrate that the system effectively synchronizes the collection of multiple analog signals and CAN bus signals,displaying them in real-time on the monitoring interface.This system aptly reflects the dynamic characteristics of various parameters during the operation of the loader’s hydraulic system,thereby meeting the stringent requirements for data collection testing of the loader's hydraulic system.

Using persimmon as raw material,Design-expert design experiment,single factor experiment and Box-Benhnken experiment were used to optimize the brewing conditions.The optimum ratio of EC yeast,Aq yeast and F33 yeast was 4∶4∶7.The optimum conditions for liquid fermentation of persimmon wine were as follows:initial sugar content 22.5%,yeast addition 0.3 g/kg,pH 3.8,fermentation temperature 20.5 ℃,fermentation for 8 d.The final sensory evaluation score was 87.8 points.The volatile components of persimmon wine fermented by mixed bacteria and single bacteria were analyzed by GC-MS.The results showed that 38 kinds of compounds were detected in persimmon wine fermented by mixed bacteria,including 7 kinds of alcohols,15 kinds of esters and 10 kinds of acids,and 6 kinds of others.Compared with single-strain fermented persimmon wine,the types of flavor substances in mixed-strain fermented persimmon wine increased,especially esters,which solved the poor flavor of persimmon wine.

In order to investigate the effect of long-term application of Gibberllin A4+7 (GA₄₊₇) on the aroma quality of pear fruits during storage,this study used headspace solid-phase microextraction (HS-SPME) combined with comprehensive two-dimensional gas chromatography/time of flight mass spectrometry (GC×GC/TOFMS) for analysis.The volatile compounds,including esters,alkenes,alcohols,aldehydes,ketones,alkanes,aromatics,and sulfides were detected in control group and treatment group.Among them,esters,alcohols,aldehydes,and alkenes are the main volatile aroma components.At the beginning of storage,Gibberllin A4+7 treatment group had the highest total mass concentration and number of volatile substances,which was 1.72 times that of the control group of pears.However,after 50 days of storage,the mass concentration and number of volatile substances in the Gibberllin A4+7 treatment group decreased rapidly.Besides,principal component analysis and heat map analysis showed that there was a significant difference in aroma changes between the Gibberllin A4+7 treatment group and the control group during storage.Further aroma analysis shows that Gibberllin A4+7 treatment can increase the mass fraction of fruit aroma types on the day of fruit storage,but can reduce the fruit aroma types of pear fruits during storage.These results comprehensively elucidated the effects of Gibberllin A4+7 on the volatile components of pear fruit during storage,and provided important theoretical support for the determination of pear storage period and production management.

Grassland grazing stability has been studied,primarily using Prey-Predator model to investigate the optimum amount of grazing.The equilibrium point was found in the general Prey-Predator model,the reciprocal Prey-Predator model and the optimal model established by classifying and analyzing the pasture.The equilibrium points derived from the three models were investigated separately using differential equation stability theory and MATLAB numerical simulations to determine the optimum values for pastures and quantity of grazing.Finally,recommendations were made for classified patch grazing and seasonal rotation.